<FlowDocument xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
              xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
              xmlns:b="http://schemas.byk.com/2009/xaml/presentation"
			        Tag="Add Measurements">
  
  
  <Paragraph>If several <Bold>Instruments</Bold> are connected with the PC, select the required unit with the 
               instruments box in the area above the data table.
               </Paragraph>
               
  <Paragraph>• Use the <Bold>Measure</Bold> button to continue the test series, and follow the instructions which appear.
               </Paragraph>
  
  <Paragraph>• The measurements can be performed with the measure button of the software or at the instrument.
               </Paragraph>
            
  <Paragraph>• Take additional readings until the minimum number of measurements is reached. Further readings can be added
               if required, or click:
               </Paragraph>

  <Paragraph><Bold>Measure Next Sample</Bold> to continue with the next specimen.
               </Paragraph>
  
  <Paragraph><Bold>End Test Seriese</Bold> to finish and return to the project report window.
               </Paragraph>
               
  <Paragraph>• To measure in continuous mode, click the <Bold>Continuous</Bold> button.
               </Paragraph>
    <Paragraph>  </Paragraph>
        
  <Paragraph>To exit without changes click the [x] icon in the upper right of the Measurement box.
               </Paragraph>
   
  
  <Paragraph>  </Paragraph>
    <Paragraph>  </Paragraph>
 
</FlowDocument>